Completed
An aircraft hangar on a 60-metre clear span
Fabrication and erection of a 60-metre clear-span hangar. The span is set by the aircraft, not by the structure — the door opening governs the primary frame.
- Location
- Qatar
- Status
- Completed
01 · Scope
What the contract covered
Fabrication and erection of a 60-metre clear-span hangar. The span is set by the aircraft, not by the structure — the door opening governs the primary frame.
02 · Details
Where it was built, and with whom
- Location: Qatar
- Status: Completed
- This client is bound by confidentiality, so the project is described by scope and scale rather than named.
03 · Figures
Scale, in technical figures
Contract values are not published. Scale is stated in tonnage, area and clear span.
- 60 m clear span
04 · Services
The services this project used
- Structural Steel, Pipe Racks & Truss Systems
- Pre-Engineered Buildings
- Roofing & Cladding Systems
From site
Photographs taken during fabrication and erection.
Record
Services delivered
Four service lines, delivered under one contract or separately.
Structural Steel, Pipe Racks & Truss Systems
Engineering, fabrication and erection of structural steel frames, pipe racks and truss systems for industrial buildings.
Pre-Engineered Buildings
Design, fabrication and erection of pre-engineered steel buildings — warehouses, workshops and factories.
Roofing & Cladding Systems
Supply and installation of roofing and wall cladding systems for industrial and commercial buildings across Qatar.
Delivered across Qatar
Counted from the projects published below. Where a client is bound by confidentiality the project is described by scope and scale instead of being named — the building is still real and the figures are still theirs.
- Store for Educational & Stationery MaterialsDesign, fabrication, supply and installation of the steel building for two warehouses and two labour accommodation buildings. Prequalification was approved by the consultant against QCS 2014, subject to shop drawings, method statement, ITP and risk assessment.
- A 6,000 m² flat-roof store for a government engineering officeEngineering, fabrication and erection of a flat-roof steel store. Prequalification was accepted by the consultant with no technical objection, subject to third-party Grade A design review and compliance with QCS 2014.
- A ground-plus-mezzanine store for a state officeEngineering, fabrication and erection of a ground-plus-mezzanine steel store. The mezzanine level carries its own framing and access steel.
Send us a scope and we will price it
Drawings, a bill of quantities or a description of the structure — whichever you have. WhatsApp reaches us fastest.